Model One Digital (Gen. 3)

Hvordan tænder jeg for min Model One Digital Gen 3?

Tryk hurtigt på Power/Source/Volume-knappen i midten. For at slukke for din enhed skal du trykke og holde for at slukke.

Hvordan ændrer jeg kilden?

Tryk hurtigt på Power/Source/Volume-knappen for at skifte mellem kilderne.

Hvordan kan jeg justere lydstyrken?

Drej din Power/Source/Volume til højre for at hæve lydstyrken og til venstre for at sænke den, eller brug lydstyrkereguleringerne på den medfølgende fjernbetjening.

Hvordan forbinder jeg min smart-enhed med min Model One Digital via Bluetooth?

Press the Power/Source/Volume knob to turn the Model One Digital on. Short press the knob to change your source. When the Display shows “Bluetooth”, you are in Bluetooth mode. For the first time you connect, you’ll need to press and hold the Tuning Bezel to enable Pairing Mode. The screen will show “Pairing Enabled”. Now open the Bluetooth settings on your smart device. Under available devices, look for Tivoli M1D3_XXXXXX. Select this to pair. You’ll notice the screen confirm the pairing with a “Pairing Success” message.

Hvordan bruger jeg Tivoli Audio Setup-appen?

The Tivoli Audio Setup app is available for free on both the Apple App and Google Play stores. This app is required for Android users to connect the Model One Digital to WiFi, and optional for Apple users. Both Andoird and Apple users are required to use this app to activate Google Cast. Setup is easy! After you have downloaded the app, enable location permissions and access to WiFi and Bluetooth. Follow the onscreen prompts to connect your speaker to WiFi. Once your speaker has connected to WiFi, you will be prompted to enable Google Cast. You may skip this step if you do not plan on using your speaker through Google Home.

Hvordan forbinder jeg min smartenhed til min Model One Digital med Google Cast?

Install the Tivoli Audio Setup App, if you do not already have it installed on your smart device. Make sure your smart device is set to the same network you intend to use to set up your Model One Digital. Press the Power/Source/Volume knob to turn the Model One Digital on. Short press the knob to change your source. When the Display shows “WiFi”, you are in WiFi Mode. The Model One Digital should automatically enter WiFi Setup Mode after initializing, but if it does not: press the Setup button on the rear panel. Now open the Tivoli app on your smart device. Select “+Add” section in the bottom menu to initiate setup. Follow the directions in the app to set up a new device. Once connected, the display will confirm if the WiFi connection was successful. After the Model One Digital has connected to WiFi, the Setup app will prompt you to activate Google Cast. Once activated, navigate to the Google Home app and look under the Devices tab. The Model One Digital will be available under “Local Devices”, tap and go to the Settings Menu to add the Model One Digital to your Home.

Hvordan bruger jeg Google Cast?

After you’ve connected your Model One Digital to WiFi and activated Google Cast with the Tivoli Audio Setup app, your speaker now works with Google Cast. You can use Google Cast from any Google Cast-enabled app. Open the selected App on your smart device. Select the Cast button in the app. Select your Model One Digital speaker and then press Play in the app.

How do I connect my smart device to my Model One Digital with Apple Airplay?

Make sure your iOS device is set to the same network you intend to use to set up your Model One Digital. Press the Power/Source/Volume knob to turn the Model One Digital on. Short press the knob to change your source. When the Display shows “WiFi”, you are in WiFi Mode. The Model One Digital should automatically enter WiFi Setup Mode after initializing, but if it does not, press the Setup button on the rear panel. On your iOS device, go to the WiFi settings. Scroll down till you see “Setup New Airplay Speaker” and select “Tivoli Audio M1D3_XXXXXX”. At this time, you can rename your speaker (which we recommend) and create an optional password. Then select “Next” and wait for the connection. Once you see the connection confirmation, select “Done”. Once connected, the display will show a confirmation.

How to use AirPlay

Når du har oprettet forbindelse via Apple AirPlay, kan du streame din lyd til din Model One Digital. Sørg for, at din iOS-enhed er på samme netværk som din Model One Digital. Åbn Kontrolcenter på din iOS-enhed. Tryk og hold på lydkortet i øverste højre hjørne, og tryk derefter på AirPlay. Vælg din Model One Digital på listen over tilgængelige enheder.

I can’t complete WiFi setup.

First, make sure your smart device is connected to your preferred WiFi network and that your Bluetooth is on. Next, turn off the Model One Digital. Close the Tivoli Audio Setup app on your smart device. Turn the Model One Digital back on and make sure it’s in Wifi Mode. Now, open the Home app again on your smart device and go through the steps again.

How do I group my Model One Digital to my other speakers via Google Home.

Make sure your Model One Digital is turned on and connected via Google Home. Next, open the Home app and tap Settings, then +Add, and finally Speaker group. Tap each device you want to add to the group. A checkmark will appear next to the selected speakers. Once all your speakers are selected, tap Next, and enter your desired group name. Tap Save when you are complete. This speaker group will show as an availble speaker in any Google Cast-enabled app.

How do I group my Model One Digital to my other speakers via Apple AirPlay.

Make sure your Model One Digital is turned on and connected to WiFi. Open the Control Center on your iOS device. Tap the AirPlay button in the upper right corner. You can then select each speaker you want to stream your current audio to.

Jeg kan ikke finde Model One Digital i min smartenheds Bluetooth-menu:

• On your smart device, confirm that you have the latest software version. You may need to update to the latest version. • On your smart device, open your Bluetooth list. • Turn on the radio by pressing the Power/Source/Volume knob. • Press the source button till the screen displays “Bluetooth”. • Look for the Tivoli Audio Bluetooth address: “Tivoli M1D3_XXXXXX”. • Select this to connect. Both your smart device and the display on the Model One Digital should confirm the connection.

Ingen lyd i Bluetooth-tilstand.

If you are unable to hear audio, try pausing and then playing your audio source. This will refresh the stream of audio or will indicate if there is an issue with your Wi-Fi. If you are connecting with a music service that requires the speaker to be selected in the native app, please confirm the correct speaker(s) is connected.

Jeg kan ikke oprette forbindelse via Apple AirPlay

Bekræft, at du bruger en iPhone, iPad eller iPod Touch med iOS 11.4 eller nyere, eller at du bruger en Mac med iTunes 12.8 eller nyere.

I’m unable to find my speaker in Spotify/Apple Music/QPlay/Tidal Music for Google Cast.

Du skal vælge Google Cast-indstillingen i hver app. Find Google Cast-ikonet i den respektive app for at forbinde din Model One Digital-højttaler. Hvis du ikke kan finde Cast-knappen, skal du tjekke, om du har forbindelse til det samme Wi-Fi som din højttaler. Prøv derefter at lukke appen og åbne den igen. Det kan være nødvendigt at åbne afspillerkontrollerne i den app, du bruger.

Jeg har oprettet forbindelse via AirPlay, men jeg kan ikke høre lyd fra højttaleren:

- Åbn Kontrolcenter på din Apple-enhed. - På iPhone X og nyere skal du stryge nedad fra øverste højre hjørne af skærmen. - For ældre modeller skal du stryge fra bunden af skærmen. - Øverst til højre i musiksektionen skal du trykke på AirPlay-ikonet. - Du kan nu vælge den højttaler, du vil afspille lyd til.

AirPlay-lyden springer over, når jeg låser eller låser min telefon op, eller når jeg skifter app:

Slå Bluetooth fra på din IOS-enhed. Når du har slået Bluetooth fra, kan du afspille musik normalt via AirPlay.

Hvad gør jeg, når jeg ikke kan oprette forbindelse til min Model One Digital?

- Tjek, at du har forbindelse til det samme Wi-Fi-netværk som din enhed. - Sluk derefter for Model One Digital og tænd den igen. - Vent på, at Model One Digital igen opretter forbindelse til WiFi-netværket. - Åbn derefter din foretrukne musikapp. Når du har valgt den sang, du vil afspille, skal du trykke på Google Cast- eller AirPlay-knapperne i musikappen. - Vælg Model One Digital som din kilde. - Når den er valgt, skal du trykke på play, og så skulle du gerne høre musikken spille gennem højttaleren.